Facing issue to set up IPv6 on Belkin AC router? If yes, then you can simply visit online forums or follow the steps given below to fix the issue immediately.
1. Go to your router and on the back discover the reset catch and hold for 15 seconds.
2. When you discharge, let the router experience, it's a circle till the light is a strong blue.
3. Attach your PC to the router with ethernet rope to one of the ports, and open up a program and sort in 192.168.2.1 to go the route as dashboard.
4. Go to Advanced settings and snap on WAN and MAC address, once in snap clone PC's MAC address
5. While in there you can go to Wifi and change your system name and secret word. (Note you may get once you click spare that you have to associate with wifi to roll out improvement simply discover your wifi system in your interface list and associate with the password(old).
6. Power off your PC, then your router(unplug) and after that your modem and hold up 1 minute. At that point, reboot the majority of your stuff and sit tight for each to power spin through.
7. Go to 192.168.2.1 and afterward hit Advanced settings, then IPv6 and you ought to see that you are associated with IPv6 as Belkin uses Autoconfig/DHCPv6 as default
A few notes that I took in the hard way: first in Belkin's manual it says that you needn't bother with your PC that you can associate remotely to setup it up with the help of Belkin Customer Service number, we'll you can, however, you won't have your PC's MAC address which the router, not certain you can clone remotely, so that is the reason I would propose interface with the router to clone the PC MAC or you're going to have strife between the router and Modem. Second, make sure your firmware is a la mode, the issue when you first get or have purchased the router is that you will need to go the Belkin site and download the new firmware and redesign yourself (think it may be astute to dependably do that at any rate) as the first firmware that accompanies the router has a glitch that lets you know the firmware is up and coming when it isn't, the new firmware alters that. If you are still unable to fix your Belkin router issues, then you can simply connect to Belkin Customer support to fix the issue.
No comments:
Post a Comment